Before The First Use; How To Use - esky KEY FINDER Manual Del Usuario

Before the First Use

Please activate the device with provided accessory before the first
use.
How to Activate the device:
There is a small hole on the side. Plug the thimble into the hole for
several seconds until red LED indicator flashes. The device has been
successfully activated.
This key finder is rechargeable. Connect it to a power outlet via the
provided Micro USB cable. It can be fully charged within 10 minutes.
The LED indicator glows in red color during charging, while changes
into blue color after being fully charged.
Equipped with low battery alert function, the LED indicator will flash
once every 2 seconds when this key finder is in low power.
-3-

How To Use

•
Attach the color-coded receivers to your frequently lost items with
the key rings or double sided adhesive tape.
•
Press and release the corresponding color-coded button on the
remote.
• If the receiver is in range, it will beep and the LED indicator will flash
simultaneously.
•
If no beep is heard, rearrange your place or replace with new
batteries to try again.
Specification
•
Working range: 15~30 meters (open space)
Sound: ≥80dB
•
•
Frequency: 433.92MHz
-4-