TABLE OF CONTENTS/ÍNDICE/TABLE DES MATIÈRES
WARRANTY ......................................................5
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
Tools and Parts
Check that you have everything necessary for correct assembly. Proper
assembly is your responsibility.
Tools Needed:
⁷⁄₁₆ in. Socket wrench
Pencil
Phillips screwdriver
Parts Supplied:
Rigid casters (2)
Swivel casters (2)
¹⁄₄ in.-20 Self-locking nuts (16)
¹⁄₄ in.-20 x ¹⁄₂ in. Carriage-head
bolts (16)
Clothes bar (1)
Floor mats (2)
Bins (3)
Bin liners (3)
2
All manuals and user guides at all-guides.com
GARANTÍA.........................................................8
CABINET/LOCKER SAFETY
Your safety and the safety of others are very important.
ASSEMBLY INSTRUCTIONS
Drill
³⁄₁₆ in. Drill bit
¹⁄₄ in.-20 x ¹⁄₂ in.
Pan-head screws (8)
Shelves (3)
¹⁄₄ in. x 1¹⁄₂ in. Lag
screws (4)
¹⁄₄ in. Washers (4)
#8 x 2 in. Drywall
screws (8)
Keys (2)
Theft deterrent latch (2)
Étagères .......................................................11
GARANTIE.......................................................12
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
Cabinet Use Requirements
Intended for use in a garage.
Maximum weight limit is 50 lbs (22 kg) for each shelf, and 10 lbs
(4.5 kg) for each bin not to exceed 300 lbs (136 kg) for the cabinet.
Maximum weight limit is 300 lbs (136 kg) for the cabinet.
Unpack the Cabinet
NOTE: Keep the 2 rear cardboard corners. They are needed to cushion
the cabinet during caster installation.
1.
Remove the keys and unlock the door.
2.
Remove and verify the contents. See "Parts Supplied."
3.
Properly dispose of packaging.