Operation Of The Device - boso bosotherm diagnostic Manual Del Usuario

Operation of the Device

Before using for the first time
The bosotherm diagnostic device contains 2 X LR03 (AAA) alka-
line batteries which are equipped with an isolating strip. This
isolating strip must be removed from the battery compartment
before using the bosotherm diagnostic for the first time.
Measurement of Human Body Temperature
1. Press the
tic in body temperature mode. After activating, the device
performs a self-test and switches to body temperature mode
after a few seconds. When the bosotherm diagnostic is ready
for a measurement in body temperature mode, "- - -" blinks
in the display and the symbol for body temperature mode
appears.
2. To measure the temperature of
the human body, hold the device
at a distance of about 5 cm (or
less) in front of the center of
the forehead so that the sensor
points toward the forehead.
3. Once the bosotherm diagnostic is in the correct position,
press the START button to perform a measurement of the
body temperature. The measurement process takes about
one second. The display indicates that the measurement is
running.
32
button in order to start the bosotherm diagnos-
→➝ Push
button
➝
→➝
➝