Important - Jabra T5330 MULTIUSE Manual Del Usuario

3.10
3.11
3.12 3.13
Note: If you can hear your own voice, transmit volume is probably too high.
1)
Reduce volume setting on your desk phone (if available feature) and compensate by increasing volume on headset.
6
All manuals and user guides at all-guides.com
Setting transmit volume
3.10 Make a call (see section 4)
to someone who can act as a test
person.
3.11 Adjust outgoing volume with
transmit volume control on base
unit. Switch through the 3 settings
until test person confirms the
1)
appropriate volume.
Setting incoming volume
3.12 During a call, adjust incoming
volume by pressing Volume button
on headset.
3.13 A tone in headset will
indicate when min./max. volume is
reached.
4. Setting up your mobile phone
Setup
Pairing your headset with your mobile phone
NOTE: Before use, please charge your headset (see 3.4).
Before you use your Jabra T5330 Multiuse with a mobile phone, you need to pair it with your
mobile phone.
Make sure the headset is on.
Remove snap-on cover. Press reset button on headset for 3 sec. Visual indicator on headset
will flash red/green rapidly. (see 9.1)
Set your Bluetooth® phone to 'discover' the Jabra T5330 Multiuse:
o Follow your phone's instruction guide. This usually involves going to a 'setup,' 'connect' or 'Bluetooth'
menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth® device.
o Your phone will find the Jabra T5330 Multiuse and will ask if you want to pair with it.
Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the passkey
or PIN '0000' (4 zeros).
Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat the steps
above. Some mobile phones require manual connection after pairing.
NOTE: If you accidentally put the headset into pairing mode, tap the Answer/End button
pairing mode.
IMPORTANT: The same headset can be paired with multiple mobile phones. However, if you
have multiple mobile phones paired, switched on and within range of the headset, the headset will
not be able to connect to the base. It is only possible to be connected to one mobile phone and the
headset base at a time. To be able to connect with the headset base, only have one paired mobile
phone turned on and within range of the headset.
to exit
7