Product Description; Cleaning After Use - Beaba TOMYDOO Guia De Inicio Rapido

Ocultar thumbs Ver también para TOMYDOO:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 5

PRODUCT DESCRIPTION

1
Main unit
2
Silicone end nozzle
3
Cup
4
Cup base
5
Silicone join (around the base
of the cup)
6
Secretion evacuation space
7
Fastening base
8
Suction hole
9
Draining hole
10
Switch
1 1
Battery compartment
12
Batteries
RECOMMENDATIONS
• To improve the efficiency of the
appliance, it is recommended to
block one nostril while using it on
the other.
• A few seconds are enough to
remove secretions. Do not use
the nose cleaner in the case of
nasal irritation.
• It is recommended to clean the
nozzle part between each use.
INSTRUCTIONS FOR USE
Inserting the batteries
open the battery compartment (1 1)
by removing it from the nose cleaner
(1). Insert two LR3 batteries than
shut the compartment.
Switching on
press the upper part of the switch
(10) and the lower part to stop the
vacuum.
4
All manuals and user guides at all-guides.com
• Store the product in a dry place
at room temperature. If not used
for several months, it is recommended
to remove the batteries.
• The Tomydoo nose cleaner helps
prevent respiratory complications.
In the case of infection, please
consult a doctor.
OPEN
CLOSE
Using the appliance
position the silicone nozzle (2) just at
the opening of the obstructed nostril
for a few seconds. The secretions are
collected in the secretion space (6).

CLEANING AFTER USE

Dissocier la partie terminale
• Pull the silicone nozzle (2).
• Pull the upper part including the cup
base (4) to remove it from the rest of
the main unit of the nose cleaner (1).
• Unscrew the cup (3) for cleaning.
• Make sure that the silicone joint is
in the right position (5).
• Screw back and reassemble the
different parts.
Nozzle part
Remove the nozzle part from the nose
cleaner (2, 3, 4, 5, 6, 7) and rinse the
different parts with water. They can be
sterilised with boiling water or steam.
Main unit
Make sure that the battery compartment
is shut. After having removed the nozzle
part, immerse the suction hole (8) of the
appliance in water and switch on. In a
few seconds the appliance is clean.
PRECAUTIONS
Tomydoo is designed to clear babies'
nasal secretions.
IMPORTANT : Tomydoo should not
be used in any conditions other than
those described above. The battery
compartment SHOULD NOT be im-
mersed in water
• Before use, make sure that all
the different parts are correctly
assembled.
• Do not push the nozzle into the
baby's nostril.
• Keep Tomydoo away from children's
reach.
• Always close the battery compartment
when cleaning the appliance.
• Do not undo the screws or joints.
This could damage the appliance.
• Do not clean Tomydoo with solvents
or abrasive products.
• Always make sure that the silicone
join is in the right position.
• Use new batteries.
5

Publicidad

Tabla de contenido
loading

Productos relacionados para Beaba TOMYDOO

Tabla de contenido