SCHULLER 506625 Instrucciones De Montaje página 2

Place the glass shades carefully without
forcing them.
Face the thread of the lamp holders and the
thread of the glass shade up straight them
perfectly and screw them in as many turns
as possible (without putting pressure on
them)
Glass shades are handcrafted, they are very
thin and if you put pressure against the
metal support, the glass will crack, they will
get hot and they will fall out.
IMPORTANT NOTICE: For safety reasons, if the electrical wire of this item has any damage, it must be repaired by
qualified staff.
You may use the following QR code to view the complete technical data sheet of the product:
If you have any technical questions, please do not hesitate to contact our technical Department.
We are at your disposal in our email:
ASSEMBLY AND INSTALLATION
ATTENTION
irodriguez@schuller.es
ITEM 506625
Rev.10.21