For Better Reception; Tape Operations - Roadstar RCR-3750UMP Manual De Instrucciones

3 English
FM / FM-STEREO RECEPTION
 Set the BAND SELECTOR (15) to FM mode for MONO reception.
 Set the BAND SELECTOR (15) to FM ST. mode for FM STEREO reception. The Stereo
indicator light up to show FM ST. mode.

FOR BETTER RECEPTION


Reorient the FM ANTENNA (11) for better reception.
 Reorient the appliance to get better AM reception.

TAPE OPERATIONS

1. Set the FUNCTION SELECTOR (12) to "TAPE" mode.
2. Press the TAPE STOP/EJ BUTTON (21) to open the cassette door and insert your ta-
pe.
3. Close the CASSETTE DOOR (10).
4. Press the TAPE PLAY BUTTON (24) to start playing tape.
5. Adjust the VOLUME CONTROL (13) to the desired level.
6. Press TAPE FFW BUTTON (22)/TAPE RW BUTTON (23) to start rapid tape winding
either forward or reverse direction. Press TAPE PLAY BUTTON (24) to start playing ta-
pe.
7. Press the TAPE PAUSE BUTTON (20) when you want to stop playing tape operation
temporarily.
8. Press the TAPE STOP/EJ BUTTON (21) when finished. Press again to open the cas-
sette door after the tape spools stop turning.
CD PLAYBACK
1. Set the FUNCTION SELECTOR (12) to "CD/MP3/USB" mode.
2. Open the CD DOOR (16) and place a CD/MP3 disc with the label up on the CD com-
partment.
3. Close the CD DOOR (16).
4. Focus search is performed if disc is inside. Total number of tracks is read and appears
on the display.
5. Playback will start automatically from the first track.
6. Press SKIP +/- BUTTON (3) to go to the next track or back to the previous track. Press
and hold while playing until you find the point of the sound.
7. Adjust the VOLUME CONTROL (13) to the desired level.
8. Press the PLAY/PAUSE BUTTON (4) again when you want to stop playback temporari-
ly.
9. Press the STOP BUTTON (5) when finished.
CD PROGRAMMING
Up to 20 tracks fo CD disc, 99 tracks of MP3 disc can be programmed for disc play in any
order. Be sure to press the STOP BUTTON (5) before use.
1. Press the MODE BUTTON (3), the display will show "P01" and flash.
2. Select desired track by using the SKIP +/- BUTTON (3). (You may select a desired al-
bum by pressing the ALBUM BUTTON (6)).
3. Press the MODE BUTTON (3) again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the PLAY/PAUSE BUTTON
(4) to play the disc in the order you have programmed.
All manuals and user guides at all-guides.com