Remote Control Operations; Installing The Battery - Invision REVOLUTION Serie Manual Del Propietário

Remote Control Operations

Installing the Battery

Before attempting to operate your remote con-
trol, install the batteries as described below.
1. Turn the remote control face down. Press
down on the ridged area of the battery
cover and slide it off.
2. Install two "AAA" batteries as shown.
Make sure that proper polarity (+ or -) is
observed.
3. Slide the cover back until it clicks.
The remote control will only operate this device.
It is not a universal remote control and will not
control other equipment.
Warning/Caution on using batteries
• Always ensure that the batteries are
inserted with the positive and negative
terminals in the correct direction as shown
in the battery compartment.
• Different types of batteries have different
characteristics. Do not mix different types.
• Do not mix old and new batteries. Mixing
old and new batteries will shorten battery
life and/or cause chemical leaks from the
old batteries.
• When batteries fail to function, replace
them immediately.
• Keep the batteries out of the reach of
children. Should the batteries be swal-
lowed, immediately consult a doctor. Also,
when disposing of used batteries, please
comply with governmental regulations or
environmental public institution rules that
apply in your country/area.
• Remove the batteries if the remote control
is not used for a month or longer.
All manuals and user guides at all-guides.com
Remote Control Operations
EN
13