FRONT VIEW
6.68"
INSTALLATION
Install dispenser using bracket provided.
Note: Mounting should comply with ADA Guidelines.
Compliance is the responsibility of the installer.
Installation with bracket and screws
1. Position bracket and mark holes using the bracket as a template.
2. Drill holes and attach bracket using appropriate anchors and screws.
3. Align dispenser on bracket and gently push downward until it clicks.
4. To remove, press dispenser release tab while lifting the dispenser upward.
Installation with bracket and tape
1. Clean bracket and mounting surface with alcohol pad.
2. Attach tape to bracket and position bracket on wall.
3. Press bracket firmly to wall for 30 seconds.
Caution - Wait 24 hours before attaching dispenser.
The installation description and illustration herein are to serve as a guide. Georgia-Pacific reserves the right and does from time to time make changes and
improvements in design, dimension, and subsequent installations. Georgia-Pacific does not take responsibility for any damage, injury to persons or property
or any other incidental or consequential losses due to these installation instructions.
SPECIFICATIONS
This enMotion
™
automated touchless soap dispenser operates on four D size alkaline batteries and only dispenses enMotion
The dispenser features two adjustable portion control settings that dispense approximately 0.4 mL or 0.7 mL per activation. The dispenser has two LEDs
to indicate dispenser activation and low battery power. The dispenser allows the use of either a push button or key lock. The dispenser is constructed of
high strength, low maintenance polymer materials and features a maintenance mode that temporarily disables the dispenser for easy cleaning.
Overall Dimensions
Dispenser: 6.68" W x 11.06" H x 3.88" D
enMotion is a trademark of Georgia-Pacific Consumer Products LP. © 2009 Georgia-Pacific Consumer Products LP. All rights reserved.
All manuals and user guides at all-guides.com
Automated Touchless Soap Dispenser Specification Sheet
11.06"
Weight
Dispenser: 2.0 lbs (0.91 kg)
SIDE VIEW
3.88"
DISPENSER - BACK VIEW
8-10"
COUNTERTOP
Model No. 52052, 52053
SIDE VIEW - COVER OPEN
11.06"
BRACKET - BACK VIEW
SCREW
MOUNTING
HOLES
TAPE
DISPENSER
RELEASE TAB
6-8"
44" MAXIMUM FROM FLOOR
™
1200 mL product refills.
Need Assistance? Contact Georgia-Pacific at:
1-866-HELLO GP (1-866-435-5647)
www.gppro.com
TAPE
GP5078.0902