HC Cargo 161726 Guia De Inicio Rapido página 4

All manuals and user guides at all-guides.com
161726 161728
Monitor Menu Operation
Pair Picture setting Nor/Mir Auto Scan setting
Function settings SD card settings Play settings Record time settings
Operation Menu
1) Pair setting:
Disconnect cameras first. Turn on the monitor and select the camera Channel
(CAM 1, CAM 2 etc) by pushing the up/down buttons. Once Channel is set, press
MENU button to select pairing icon, and press confrim button. The monitor is now
in pairing mode and counting down from 50 second, then apply power to camera
within 50 seconds.
2) Picture settings:
Select the picture settings on the menu and press the confirm button
1. Brightness setting: 0-10 (left / right button to adjust)
2. Contrast setting: 0-10 (left / right button to adjust)
3. Color setting: 0-10 (left / right button to adjust)
3) Mirror/Normal image setting:
Set CAM1/CAM2/CAM3/CAM4 image in 4 modes
4) Auto Scan Setting
1 . Set CAM1 / CAM2 / CAM3 / CAM4 channel auto scan settings mode on/off
2. Set camera auto scan time
Note:
Note: When the monitor in SCAN mode, the CAM1/CAM2/CAM3/CAM4 image will
switch automatically according the setting time.
Press t/s to quit the switch.
5) Function setting:
1 . Recording time setting
2 . NTSC or PAL system switch;
3 . LED screen ambient light sensor on/off;
4 . Reversing Ruler ON/OFF Setting: CAM2
6) SD card settings
1 . SD card total capacity
2 . SD card remain capacity
3 . SD card storage cycle of video recording. ON: SD card full capacity,
automatically overwrite. OFF: Stop recording when memory is full.
4. Formatting, all stored data will be cleared.
Vedpak 219_Version 1_08.2017
4