MTD 19A30017OEM Manual Del Usuario página 6

11. Assemble the handle grip onto the upper lift handle. See
figure 5.
12. Place the upper lift handle onto the lower lift handle
assembly. Align the holes and secure with the clevis pin
and a small hair cotter pin. See figure 5.
UPPER LIFT HANDLE
CLEVIS PIN
LOWER LIFT HANDLE ASSEMBLY
ATTACHING BLADE TO TRACTOR
13. To install the shoulder bolts, choose figure 6, 7 or 8,
depending on the type of tractor.
a. Install a shoulder bolt and a 3/8" hex lock nut in the
front bracket on each side of the tractor, unless a
shoulder bolt is already present. See figure 6.
b. Install a shoulder bolt and a 3/8" hex lock nut on each
side of the tractor frame. See figure 7.
SHOULDER
BOLT
3/8" HEX LOCK NUT
HANDLE GRIP
HAIR COTTER
PIN (SMALL)
Figure 5
Figure 6
Figure 7
ENGLISH
c. Attach a blade mounting bracket to each side of the
tractor frame using a shoulder bolt, a 3/8" x 3/4" hex
bolt and two 3/8" hex lock nuts. See figure 8.
14. Pull out on the attachment pins on the hitch assembly
and swing the top of the pins down away from the holes
they were in. See figure 9.
15. Hook the hitch assembly onto the shoulder bolts in the
sides of the tractor frame. See figure 9.
16. Align the holes in the hitch assembly with the holes in
the tractor frame. Insert the attachment pins to lock the
hitch assembly in place. See figure 9.
6
Figure 8
SHOULDER BOLT
ATTACHMENT PIN
Figure 9