Important Notice - Orbea 252 WH 2022 Guia De Inicio Rapido

2 | OR B EA
IMP O RTAN T N OT I CE
Charge the Range Extender completely be-
fore using it for the first time. Charge the
Range Extender as soon as you receive it. If
you are not going to use the Range Extend-
er, make sure it is charged to at least 50%
of its capacity every 3 months.
This quickstart guide is not the complete Orbea Range Ex-
tender 252 Wh 2022 user manual.
Access your Range Extender compatible bicycle model
Bluepaper technical manual on Orbea´s website.
www.orbea.com > Support > Manuals >Ebikes
In your model´s Bluepaper you will find all the relevant
information about the use, care, installation and spares for
the Range Extender external battery.
LANGUAGES
To read the latest version of this guide in more languages,
visit our website:
www.orbea.com > Support > Manuals >Product >
Range Extender 252 Wh Orbea 2022 Quickstart guide
Or scan the QR code to access the digital version directly:
The Orbea Range Extender connects to the electrical assist
system to add 252 Wh of extra capacity to the system.
The system´s total capacity will depend on the internal
battery´s capacity.
COMPATIBILITY NOTE
This Range Extender 2022 external battery is not compat-
ible with Rise Carbon 2021-2022 models.
QUICKSTART GUI DE
A . R A N GE EXTE N DE R AS S E MB LY
1. Install the Range Extender dedicated mount onto the
downtube and fix it in place with the original bolts with
a recommended torque setting of 5 Nm.
2. When installing the Range Extender holder, remove the
four washers pre-installed on the frame and make sure
that, once installed, the Range Extender´s six contact
points rest correctly against the downtube.
3. Install the Range Extender into the mount and secure it
with the side o-ring.
The Range Extender bottle holder is compatible
with standard bottles when the Range Extender is
not installed.
1
3
5 N.m
2
x6
3
R ANGE EXTENDER · 252Wh 2022
B. CO NN ECTING T HE RA NGE
EXTEN DER TO THE SYST EM
1. Turn the safety tabs of the Range Extender cable coun-
ter-clockwise before connecting it to the battery.
2. Connect the cable to the Range Extender charging port.
Open the bicycle charging port and connect the Range
Extender cable.
Different Orbea bicycle models use a Range Extender
connection cable of a specific length. Consult the bi-
cycle model Bluepaper technical manual to know the
specific length of the connection cable for that model.
1
3
3. Turn the cable´s safety tabs clockwise to lock the cable
in place.
To disconnect the Range Extender cable or to remove
the Range Extender from the bicycle to charge it, turn
first the cable´s safety tabs and carefully pull from the
cable´s connector.
If the bicycle was On when connecting the
Range Extender to the bicycle, the system will
turn itself Off and you will need to turn the bi-
cycle On again by pressing the power button.
This happens so the system can reboot and
recognize the Range Extender as part of the
power system when the bicycle is turned
On again. Once you turn the bicycle On, the
Range Extender will be operative. It is not nec-
essary to turn the Range Extender On.
If the Range Extender is disconnected when
the bicycle is On, the bicycle will turn itself
Off and it will be necessary to turn the bicycle
back On. This happens so the system can re-
boot and recognize the internal battery as the
only current power supply.
2
2
ORBEA | 3
EN
1
3