Publicidad
Step 11
Step
Slide seven DIVIDERS (89M) onto the RACK MOLDING (N2) so the
å
holes in the DIVIDERS line up with the holes in the RACK MOLDING.
NOTE: The DIVIDERS (89M) should all face the same direction.
å
Fasten these seven DIVIDERS (89M) to the RACK MOLDING (N2). Use
å
fourteen BLACK 1-3/8" PAN HEAD SCREWS (118S).
www.sauder.com/services
BLACK 1-3/8" PAN HEAD SCREW
(14 used in this step)
419342
(7 used)
89M
N2
118S
Page 15
Publicidad
