Lanaform LA190206 Manual Del Usuario página 7

To remedy this, simply expel the air from the
pouch. To do this, first remove the connector
cover using a Phillips screwdriver, then remove
the silicone stopper using pliers if necessary.
Expel as much air as possible and then replace
the stopper and connector cover.
Storage
Put the electric hot water bottle in its box or
in a dry place.
Avoid contact with sharp edges and other
pointed objects, which might cut or pierce
the fabric surface.
To prevent the power cable breaking at any
point, do not wind it up.
Make sure that the electric hot water bottle is
completely dry before storing it.
Cleaning
Unplug the electric hot water bottle from the
charger plug and wait a few minutes before
cleaning it.
Clean it using a soft, slightly damp sponge.
Do not immerse it in liquid to clean it.
Never use abrasive detergents, brushes or a
thinning agent to clean it.
Technical spec-
ifications
• Voltage: 220-240V~
• Frequency: 50/60Hz
• Power: 440W
• Composition of the outer lining:
45% recycled polyester, 55% cotton
• Composition of the inner lin-
ing: 100% polypropylenee
E-IM-NeckWarmerGo-Lot001.indd 7 E-IM-NeckWarmerGo-Lot001.indd 7
Breakdowns
and solutions
The hot water bottle
inflates and does not
heat up properly.
• Changes in atmospheric pres-
sure may cause air to accumu-
late in the hot water bottle.
• Carefully remove excess air from the hot
water bottle by first removing the con-
nector cover using a Phillips screwdriv-
er. Then remove the silicone stopper us-
ing pliers if necessary. Expel as much
air as possible and then replace the sil-
icon stopper and connector cover.
Advice regarding
the disposal
of waste
All the packaging is composed of materials
that pose no hazard for the environment and
which can be disposed of at your local sorting
centre to be used as secondary raw materials.
The cardboard may be disposed of in a paper
recycling bin. The packaging film must be tak-
en to your local sorting and recycling centre.
When you have finished using the device, please
dispose of it in an environmentally friendly way
and in accordance with the law.
Limited warranty
LANAFORM guarantees this product against
any material or manufacturing defect for a pe-
riod of two years from the date of purchase,
except in the circumstances described below.
The LANAFORM guarantee does not cover
damage caused as a result of normal wear to
this product. In addition, the guarantee cov-
ering this LANAFORM product does not cover
damage caused by abusive or inappropriate
12/08/2021 09:16:51 12/08/2021 09:16:51