Mettler Toledo Ticket+ Instrucciones De Manejo página 10

Default Serial Settings of the Printer
Baud Rate: 9600
Bits/Parity: 8, none
Stop Bit: 1 bit
Handshake: None
6 If Network Port is selected, enter the network setting of
the printer in the pop-up screen, then click SET.
Configure the network setting of the host computer.
NOTICE: Ensure the printer and the host computer
are in the same network segment.
Default Network Setting of the Printer
IP Address: 192.168.1.111
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
7 Click CONNECT.
8 When connection is successful, the printer information
is shown.
Note
The counts of Ribbon and Printer Head may be highlighted in one the follow color:
Counts of Ribbon
Total Printed Rows
< 25,000
25,000 < total printed rows < 30,000
> 30,000
4 Using Ticket+ Printer Configuration Software​ ​
Port
IP Address
192.168.1.xxx
Subnet Mask
Default Gateway
Information
Printer Name
Boot Version
Font Version
S/N
Ribbon
Printer Head
Color Action
Green -
Yellow Replace the ribbon (refer to Installing Ribbon).
Red Replace the ribbon immediately (refer to
Installing Ribbon).
SET
APR320
V2.2
V1.8
12107A08003
290
290
Ticket+