Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 179
Quick Start Guide
Scanning... - The station is attempting to authenticate and associate with the
designated.access.point.or.Ad.Hoc.node.
Disconnected -.The. WLAN. Card. is. installed. to. the. system,. but. it. has. not.
connected to a wireless device.
SSID
Displays the Service Set Identifier (SSID) of the device that the card is either
associated.or.intending.to.join.

MAC address

Indicates the hardware address of the WLAN Card. MAC address is a unique
identifier for networking devices (typically written as twelve hexadecimal digits
0 through 9 and A through F, six hexadecimal numbers separated by colons,
i.e. 00:E0:18:F0:05:C0).
Current Channel
Displays the radio channel to which the card is currently tuned. This number
changes.as.the.radio.scans.the.available.channels.
Current Data Rate
Displays the current data rate in megabits per second (Mbps).
Radio State
Shows the wireless radio status: ON or OFF.
Radio On - When the wireless radio is turned ON, the following icon
appears in the upper left of the Status page.
Radio Off- When the wireless radio is turned OFF, the following icon
appears in the upper left of the Status page.
Buttons
Rescan – Make.the.WLAN.Card.rescan.all.available.devices..If.the.current.link.
quality.or.signal.strength.is.poor,.rescanning.can.be.used.to.push.the.radio.off.
a weak access point and search for a better link with another access point. This
function will take several seconds to complete.
Change SSID – Click on this button to set the SSID to that of the AP you want
to.connect.
Search & Connect – Click on this button to connect to an available wireless AP.
ASUS WLAN Card
9

Publicidad

Tabla de contenido
loading

Tabla de contenido