E
J
12. Stand the unit upright.
13. Extend the Hinge Arms pre-attached on one DOOR PANEL (J) and attach to the Hinge Bases on
the RIGHT SIDE PANEL (F). Align and insert the "U" slot on Hinge Arm under the bolt head on
the Hinge Base. Make sure that both door hinges engage and function properly.
14. Repeat the same procedure to install the other DOOR PANEL (J) to the LEFT SIDE PANEL (E).
15. Close the doors to double check the alignment. If you find that the doors need to be adjusted
slightly, please refer to the supplement on page 2 and turn the appropriate screws for a perfectly
aligned door. Once adjusted, lock the hinges in place by tighten the bolt on Hinge Base.
16. Remove the bolts in the HANDLES (16), and then use the bolts to attach the HANDLES to the
outside of the DOOR PANELS (J).
All manuals and user guides at all-guides.com
Assembly Instructions
F
If you choose the Table-top configuration,
continue to the next step.
If mounting the TV to the Floating Swivel
Mount, skip ahead to PAGE 15.
J
HANDLE AND BOLTS
(2 used in this step)
11
J
E/F
⑯