Tabla de contenido
Publicidad
English
Original instructions.
© Copyright 2017, Desoutter HP2 7SJ UK
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This product is designed for versatile industrial
applications.
No other use is permitted.
For professional use only.
Suitable for industrial environment only.
TECHNICAL DATA
● See page 2.
Additional data:
Operating temperature -5°C to 50°C
Storage temperature
Operating humidity
IP65 compliant front panel
● Contact your local Desoutter
representative for more information.
SAFETY INFORMATION
● Read these safety instructions carefully.
● Keep this user manual for later reference.
● Disconnect this equipment from any AC outlet
before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
● For plug-in equipment, the power outlet socket
must be located near the equipment and must
be easily accessible.
● Keep this equipment away from humidity.
● Put this equipment on a stable surface during
installation. Dropping it or letting it fall may
cause damage.
● The openings on the enclosure are for
air convection to protect the equipment
from overheating. DO NOT COVER THE
OPENINGS.
01/2017
All manuals and user guides at all-guides.com
-20°C to 75°C
10%~90% relative
humidity, non-
condensing
● Make sure the voltage of the power source is
correct before connecting the equipment to
the power outlet.
● Place the power cord in a way so that people
will not step on it. Do not place anything on
top of the power cord. Use a power cord that
has been approved for use with the product
and that it matches the voltage and current
marked on the product's electrical range label.
The voltage and current rating of the cord
must be greater than the voltage and current
rating marked on the product.
● All cautions and warnings on the equipment
should be noted.
● If the equipment is not used for a long time,
disconnect it from the power source to avoid
damage by transient overvoltage.
● Never pour any liquid into an opening. This
may cause fire or electrical shock.
● Never open the equipment. For safety
reasons, the equipment should be opened
only by qualified service personnel.
● If one of the following situations arises, get the
equipment checked by service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
c. The equipment has been exposed to
moisture.
d. The equipment does not work well, or you
cannot get it to work according to the user's
manual.
e. The equipment has been dropped and
damaged.
f. The equipment has obvious signs of
breakage.
● Do not place heavy objects on the equipment.
● The unit uses a three-wire ground cable which
is equipped with a third pin to ground the unit
and prevent electric shock. Do not defeat
the purpose of this pin. If your outlet does
not support this kind of plug, contact your
electrician to replace your obsolete outlet.
7 / 12
6159922280_02
Publicidad
Tabla de contenido
