Maytronics 8151226 Manual Del Usuario página 4

Setting the Automatic Mode
To Change the Automatic Mode settings
First press the Manual/Automatic select button, then set according to the following table:
Cleaning cycle Fast
indicator
This determines
the cleaning cycle
time. The RCU
allows you to
choose between
the following
options.
Supreme/Pulit
1.5 hour cycle
Residential
2 hour cycle
cleaners
Commercial 4 hour cycle
cleaners
Delay Time Immediate start
indicator (Default setting)
This determines
when the pool
cleaner starts to
work.
A delay allows the
dirt to settle to the
bottom of the pool.
Cleaning action Standard
indicator Floor and wall
Allowing you to cleaning.
(Default setting)
choose from the
following options.
Note:
After 2 minutes, if no button is pressed, the Remote Control Unit will shut-down and the
Pool cleaner will continue to work in the previous settings
When the "Ultra-Clean" and "Walls Only" options finish their cycles, the RCU will return
to default settings.
All manuals and user guides at all-guides.com
Efficient
(Default setting
2.5 hour cycle for
everyday use
3 hour cycle for
everyday use
6 hour cycle for
everyday use
One Hour delay
Ultra-clean
Stronger suction and
slower movement
Floor and cove
cleaning only.
3
Extra
)
3.5 hour cycle
4 hour cycle
8 hour cycle
Two Hours delay
Floor only
Cleans only the
floor and coves.
Walls Only
Cleans walls
and waterline
only.