Maintenance; Hand Brake Adjustment - Welby 7734 Manual Del Usuario

Maintenance

To ensure that your rollator is operating safely and smoothly, please check
the following peridoically:
1. Be sure that all knobs are fully tightened and are at equal heights.
Test Rollator for stability before applying full weight to hand grips.
2. Test the loop locks before operating the Rollator. When wheels are
locked, lock bar on rear wheels should prevent wheels from turning.
If the wheels turn while brakes are locked, please take unit back to
dealer for adjustment. When locks are released, the wheels should
turn freely.
3. Replace tires when significantly worn or damaged.
4. Check that the nuts and bolts are secure, on a regular basis, before
use.

Hand Brake Adjustment

The hand brake system fitted on this rollator complies with the
manufacturer's quality standards. The hand brake system has
been pre-set (adjusted) to the best performance setting. To better
suit your personal needs, you may need to adjust the hand brake
system from time to time.
1. Hold firmly in place.
DO NOT turn.
2. To tighten the hand brake
adjustment, turn nut CLOCKWISE.
To loosen the hand brake adjustment,
turn nut COUNTER-CLOCKWISE.
14
platinumcs@drivemedical.com
All manuals and user guides at all-guides.com
1
2
Adjustable Rollator
AFTER SALES SUPPORT
866-694-5085
USA