ADJUSTMENTS & USAGE GUIDE
ADJUSTING THE TENSION
Adjust the tension by rotating the Tension
Control Knob (No. 9) clockwise to increase
the level of resistance. Rotate the Tension
Control Knob (No. 9) counter-clockwise to
decrease the level of resistance.
Tension levels are set at Level 1 being the
lowest and Level 8 being the highest.
WARNING
The elliptical is intended to use in a sitting
position only, do not stand on the elliptical.
Failure to follow all warnings and instructions
could result in serious injury or death.
USE ONLY WHILE SITTING.
DO NOT STAND ON THE
ELLIPTICAL!
IMPORTANT NOTE:
Please remove the plastic tab from the meter
before use!
Plastic Tab
8