Important Safety Information
Electric shock and fire hazard:
• Do not expose this unit to rain or moisture.
• Do not use the unit if it is wet or damaged.
• Use test leads or accessories that are appropriate for the application. See the
category and voltage rating of the test lead or accessory.
• Inspect the accessory before use. It must be clean and dry, and the insulation must
be in good condition.
• Use this unit for the manufacturer's intended purpose only, as described in this
manual. Any other use can impair the protection provided by the unit.
Failure to observe these warnings can result in severe injury or death.
Electric shock hazard:
• Do not apply more than the rated voltage between any two input terminals, or
between any input terminal and earth ground.
• Do not contact the test lead tips or any uninsulated portion of the accessory.
Failure to observe these warnings can result in severe injury or death.
• Do not open the case, except the battery compartment.
• Before opening the case, release the trigger, remove the test leads (or jaw) from the
circuit, and shut off the unit.
Failure to observe these warnings can result in severe injury or death.
4
All manuals and user guides at all-guides.com
Electric shock hazard:
Contact with live circuits can result in severe injury or death.