Herschel Select XLS Instrucciones De Instalación Y Funcionamiento página 9

Herschel Easy-fix mounting system
Preparation – Important Notice
When the EasyFix bracket is fitted to the panel, it will be offset from centre due to the locking movement. To
ensure your panel fits exactly where you want it on the wall, it is important before installing that you place the
bracket on the panel in its locked position and measure the distance of the mounting holes to the edges of the
panel before then marking, checking and drilling them on the wall to cater for this offset.
Step 1
Use a spirit level to ensure the
bracket is level and mark the
position for drilling in each of the
small holes in the four corners of
the mounting bracket.
Step 2
Drill holes using a 8mm drill.
Step 3
Insert the supplied rawlplugs. If
mounting on to a cavity wall you
will need appropriate fixings (not
supplied).
Step 4
Screw the mounting bracket to the
wall using the supplied screws.
Step 5
Screw the towel rail to the back of
the panel using the fixing screws
provided.
Step 6
Fit the panel to the wall by locating
all four mounting fixings on the
rear of the panel into the wide
openings on the mounting bracket
and slide the panel down, left and
down again to its final fixed
position.
Unscrew the four distance pieces
(in each corner) on the rear of the
heater panel so that the panel is
held tightly in its mounting on the
wall and cannot be moved.
Ensure the power lead is free from any obstruction behind the panel.
Removal
Herschel Easy-fix is designed to be secure to avoid accidental dismounting or tampering with the panel. To
dismount the panel, screw the four distance pieces back in and move the panel up, right, then up and out.
Select XLS Towel heater
ENGLISH