Whalen Hendricks HEN75C Manual Del Usuario página 4

B/C
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. With the help of an assistant, remove the TV Console (A) from the box, and place it near the final
installation location.
3. The Adjustable Shelves (B and C) are pre-installed for shipping. If the shelf position is not to your liking,
you will need to reposition the shelf by following the steps below.
a. Look under each Shelf (B and C), and locate the wood screws holding the shelf to the shelf supports.
b. Remove the wood screws from each shelf support with a Phillips screwdriver.
c. Remove the Shelf (B or C) from the console.
d. Remove the shelf supports from the console and re-position them in the desired location. Make sure you
place the shelf supports in the same level so the Shelf is not tilted.
e. Place the Shelf (B or C) back onto the newly relocated shelf supports.
f. Using the Phillips screwdriver, reinstall the wood screws through the shelf supports and into the shelf.
Assembly Instructions
B/C
A
B
4
C
B