Tabla de contenido
Publicidad
Function Key
Macro Recording
Step 1: Press FN+R-Alt to start the Macro Recording process,The
Gmode LED will begin flashing.
Step 2 : Type any key(s) you want to record.
Step 3 : Press FN+R-Alt again,the Gmode LED will flash more quickly
Step 4 : Assign the key you want to save this macro.
Step 5 : The Gmode LED will stop flashing, the Macro Recording process is
finished.
Notice : Macros cannot be assigned to FN and Win Keys.
Hardware Reset
If the keyboard has an unexpected problem, you can reset the
keyboard by holding FN+ESC for 3 seconds. The LED will flash once, and the
current profile will be reset to the default setting.
Software Installation
Step 1: Please plug in the gaming keyboard to any available USB port on
your computer.
Step 2: Dowload the Chronus CS-21 installation software from: www.digifast-
inc.com
Step 3: Double-click the "setup.exe" to install the software.
Step 4: The setup instructions will guide you through the setup process.
Lighting up
Lighting Down
LED Mode Change
LED Mode Change
13
EN
Publicidad
Tabla de contenido
