Cameo H2 FC Manual De Usuario página 10

STANDALONE MODE COLOR MACRO
15 different colour macros and 4 individual colours (User Color 1-4) are available as presets. The brightness can be adjusted for each pre-
set. Starting from main display 1, press MENU to enter the main menu. Now use the controls UP and DOWN to select the menu item Stand
Alone and confirm with ENTER. Again use UP and DOWN to select the standalone mode Color Macro and confirm with ENTER. Using
the UP and DOWN controls, select the desired colour preset and confirm with ENTER (Color Off = blackout). You can now set the desired
brightness from 000 to 100 using UP and DOWN; confirm with ENTER.
The individual colours User Color 1-4 are created in menu item Edit User Color in the Stand Alone menu.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
STANDALONE MODE TUNEABLE WHITE
In the standalone mode Tuneable White, the colour temperature (CCT) can be adjusted from 1800 K to 6500 K in 100 K increments, in additi-
on to the brightness (Dimmer) and colour (Tint). Starting from the main display, press MENU to enter the main menu. Now use the controls
UP and DOWN to select the menu item Stand Alone and confirm with ENTER. Use UP and DOWN to select Tuneable White, confirm with
ENTER and then use UP and DOWN to select the menu item you wish to edit. Confirm with ENTER. Use UP and DOWN to configure the
desired value, then confirm all entries with ENTER.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
STANDALONE MODE EDIT USER COLOR
The standalone mode Edit User Color allows you to store four individual colour presets for brightness, stroboscope (strobe) and a colour mix
of R, G, B, A and L directly in the device. Starting from main display 1, press MENU to enter the main menu. Now use the controls UP and
DOWN to select the menu item Stand Alone and confirm with ENTER. Again use UP and DOWN to select Edit User Color and confirm with
ENTER. Using UP and DOWN, now select the desired preset (Color 1 -Color 4) and confirm with ENTER. Use UP and DOWN to select the
menu item you wish to edit and confirm with ENTER. You can now use UP and DOWN to configure the desired setting from 000 to 255. The
strobe effect values correspond to those in channel 2 of the DMX table 3CH CP. Confirm all entries with ENTER.
Menu
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
10
Stand Alone Color Macro
Auto Color Off
Red
Static
Color Macro Amber
Tuneable White Yellow W
Yellow
Edit User Color
Green
Timer
Turquoise
Cyan
Blue
Lavender
Stand Alone Tuneable White
Auto Dimmer
Static CCT
Tint
Color Macro
Tuneable White
Edit User Color
Timer
Stand Alone Edit User Color
Auto
Static
Color Macro
Tuneable White
Edit User Color
Timer
Mauve
Magenta
Pink
Warm White
White
Cold White
User Color 1
User Color 2
User Color 3
User Color 4
000-255
1800K - 6500K
-10 - 10
Color x
Color 1 Dimmer
| Dimmer Fine
Color 4 Strobe
Red
Green
Blue
Amber
Lime
000-255
000-255
000-255
000-255
000-255
000-255
000-255
000-255