Emerson LC320EM8 Manual Del Usuario página 33

Symptom
Picture rolls vertically
Different color marks on screen
Poor reception on some channels
Picture OK, sound poor
No reception of digital signals
Channel changes automatically
Remote Control doesn't work
Problems with Closed Caption Feature
Misspelled captions are displayed.
Captions are not entirely displayed, or
captions are delayed behind the dia-
logue.
Captions are displayed as a white
box.
No caption is displayed in the Closed
Caption-supported program.
No caption is displayed when playing
the videotape containing captions.
Black box is displayed in the screen.
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels
may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.
All manuals and user guides at all-guides.com
Remedy
• When the outside antenna is used, check the wire condition and
connection.
• Electrical interference from nearby appliances may affect picture
quality.
• View other TV channels. The problem might be limited to the
broadcasting station.
• Move your TV away from nearby electric appliances. Turn off the
power and wait 30 minutes before turning it back on.
• View other TV channels. The problem might be limited to the
broadcasting station.
• Check the antenna or cable connection to the main unit.
• When the outside antenna is used, check the wire condition and
connection.
• Electrical interference from nearby appliances may affect picture
quality.
• View other TV channels. The problem might be limited to the
broadcasting station.
• View other TV channels. The problem might be limited to the
broadcasting station.
• Make sure Autoscan has been completed (Refer to "AUTOSCAN" on
page 13). Autoscan must be completed when you set up your TV for
the first time or move it to a location where previously unavailable
channels are broadcast.
• The selected channel may not be broadcasting.
• When Autoscan is interrupted, some channels will not be
received. Make sure to complete Autoscan in the setup screen.
• Many digital channels have alternate channel numbers. TV changes the
numbers automatically to the ones signifying the broadcasting stations.
These are the numbers used for analog broadcasts.
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
• Check if there is an obstacle between the sensor and the
remote control.
• Test the signal output. If OK, there might be remote sensor trou-
ble. (Refer to "IR SIGNAL CHECK" on page 34.)
• Closed captioning production companies may broadcast pro-
grams without correcting the misspelling in a live broadcast.
• Captions that are delayed a few seconds behind the actual dialogue
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute. If
a dialogue exceeds that rate, selective editing is used to ensure that
the captions remain up-to-date with the current TV screen dialogue.
• Interference from buildings or weather conditions may cause
captioning to be incomplete.
• Broadcasting station may shorten the program to insert adver-
tisement. The closed caption decoder cannot read the informa-
tion of the shortened program.
• The videotape may be illegally copied, or the caption signal
might not have been read during copying.
• "Text" mode is selected for caption. Select "CC1", "CC2", "CC3",
"CC4" or "Off".
33
EN