2.3
Predictable incorrect application
The product must never be used in the following cases and for the following
purposes:
•
Use with undiluted additives, alcohols and acids
•
Pressure operation with fuel pumping system
•
Outdoor use
2.4
Qualification of personnel
This product may only be mounted, commissioned, maintained and decom-
missioned by a qualified, specialised company which has all required certifi-
cations and which meets the following requirements:
•
Compliance with all directives, standards and safety regulations concern-
ing handling of water-polluting substances as applicable at the installation
site of the product.
•
In Germany: Certification as per § 62 "Verordnung über Anlagen zum
Umgang mit wassergefährdenden Stoffen" (AwSV) (Ordinance on Instal-
lations for Handling Water-Polluting Substances).
Only appropriately trained persons who are familiar with and understand the
contents of these operating instructions and all other pertinent product docu-
mentation are authorized to work on and with this product.
These persons must have sufficient technical training, knowledge and expe-
rience and be able to foresee and detect potential hazards that may be
caused by using the product.
All persons working on and with the product must be fully familiar with all
directives, standards and safety regulations that must be observed for per-
forming such work.
2.5
Personal protective equipment
Always wear the required personal protective equipment. When performing
work on and with the product, take into account that hazards may be present
at the installation site which do not directly result from the product itself.
2.6
Modifications to the product
Only perform work on and with the product which is explicitly described in
these operating instructions. Do not make any modifications to the product
which are not described in these operating instructions.
Information on safety
FloCo-Top-C
EN
5