SCHÜTTE 03073 Instrucciones De Montaje página 14

• Proceed very carefully when opening.
• Check that the delivery is complete.
• Check whether the built-in socket or the individual parts
are damaged. If this is the case, do not use the built-in
socket. Contact the manufacturer at the service address
provided.
• In case of faulty installation, the warranty - especially for
consequential damages - is excluded!
Cleaning and care
• SHORT-CIRCUIT HAZARD! Water or other liquids that
have penetrated into the housing can cause a
short-circuit!
• Never immerse the built-in socket in water or other
liquids.
• Make sure that no water or other liquids enter the
housing.
• RISK OF DAMAGE! Improper handling of the built-in
socket can lead to damage.
• Coloured surfaces must never be cleaned with abrasive,
corrosive or alcohol-based agents.
• Do not use aggressive cleaning agents, brushes with
metal or nylon bristles or metallic cleaning objects such as
knives, hard spatulas and the like. These may damage the
surfaces.
• Do not insert any objects into the device openings!
• Never immerse the built-in socket in water for cleaning
and never use a steam cleaner. Otherwise, the built-in
socket may get damaged.
Maintenance
• Check all the connections for visible damage at regular
intervals.
• If there is visible damage to the built-in socket or the
power cable, these should immediately be checked or
replaced by a specialist.
Storage
• Always store the built-in socket in a dry place.
Decommissioning
• Carry out the dismantling in reverse order of the
installation instructions.
Disposal
• Dispose of the packaging appropriately. Put paper and
card in the paper bin, film in the recycling box.
• Old appliances must not be disposed of in the house-
hold waste!Should the built-in socket no longer be used,
each consumer is legally obliged to separate old appli-
ances from the household waste, e.g at a collection site
in their municipality/urban district. This ensures that old
equipment is recycled properly and negative effects on
the environment are avoided.
Declaration of conformity
We hereby declare that the listed built-in socket complies
with the requirements of the EU and EC directives valid at
the time of issue.
The full text of the EU Declaration of Conformity is available
under the following link:
web.fjschuette.de/konformitaetserklaerung/CE-Konformitaet-
serklaerung_Steckdosen.pdf
 The illustrations are to be considered as figurative
representations, deviations of the product are possible.
Subject to technical modifications.
14