EN
2.2. Product usage
INSTALLATION
Installation site
When selecting an installation site for your appliance you should make
sure the floor is flat and firm, and the room is well ventilated. Avoid
placing your appliance near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase electrical consumption.
Extreme cold ambient temperatures may also cause the unit not to
perform properly. This unit is not designed for use in a garage or
outdoor installation. Do not cover the appliance.
When installing the unit, ensure that 10 cm of free space is left on both
sides, 10 cm to the rear and 30 cm above the top of the unit. This will
allow cold air to circulate and improve the efficiency of the cooling
process.
Reversing the Door handle
1) Remove the screw caps from
2) Place the handles into the screw
the door handle holes.
holes and press them to fix.
11
Refrigerator Freezer | Frigorífico Combi | Frigorífico Combinado