LED 2
LED 1
All-Round
LED Safety
Light RED
A
C
EN | A
On/O Button
B
Charge LED
C
Micro USB port
FR | A
Bouton marche/arrêt
B
B
Charger LED
C
Port USB Micro
ES | A
Boton de encendido/apagado
B
LED de carga
C
Puerto micro USB
Mounting instructions
Instructions de montage
Instrucciones de montaje
EN |
Place light on
Micro-rails and
EN |
Turn 90° clockwise to lock and
gently press down
90° counter-clockwise
to unlock and remove
FR |
Placez la
FR |
Tourner à 90
° dans le sens
lumière sur
Micro-rails et
horaire pour
doucement
verrouiller et
appuyer
à 90 ° dans le
sens anti-horaire
pour déverrouiller
ES |
Coloque la luz
en micro-carriles y
ES |
Girar 90° a la derecha para
suavemente
bloquear y 90° hacia la izquierda
apretar
para desbloquear y extraer
MODE
FUNCTION
RUNTIME *
MODE
FONCTION
DURÉE *
MODO
FUNCIÓN
DURACIÓN *
1
20 Lumen
5h 30min
2
Flash 1
10h
3
Flash 2
10h
LowBatteryFlash
30min
* Depending on chip, charging state and surrounding temperature
* Selon la puce, l'état de charge et de la température environnante
* Dependiendo de la chip, estado de carga y la temperatura del ambiente
Charging the All-Round LED Safety Light RED
• Connect the provided USB cable to the Micro-USB port [C] and a suitable
USB power source.
• The charging process starts when the LED [B] is lit red.
• Charging is complete, when the LED [B] turns green.
• It takes approx. 2 hours to fully charge the All-Round LED Saftety Light RED.
Power On/Off [A] Light Modes
• Turn on by pushing power-button [A] for 1 second.
• Shortly press power-button [A] to switch through light modes, shown
on page 3.
• Turn o by pushing power button [A] for 1 second.
et retirer
• If battery power is critically low in any of the 3 modes. LowBatteryFlash will
start automatically and work for at least 30 minutes.
Battery LED
• When turning on light or changing mode, battery LED will light up
• green: 40 - 100% charged
• orange: < 40% charged
• red: 30 minutes or less remaining (LowBatteryFlash)
EN
Specifications
EN |
• Battery Voltage: 3.7V
• Battery capacity: 1.37Wh, 370mAh
• Input: 5V, 500mA
• Working temperature: -20–40°C / -4–104°F
• Working humidity: 30–95% RH
Caractéristiques
FR |
• Voltage de batterie: 3.7V
• Capacité de la batterie: 1.37Wh, 370mAh
• Alimentation : 5V, 500mA
• Température de fonctionnement: -20–40°C / -4–104°F
• Humidité de fonctionnement: 30–95% RH
Especificaciones
ES |
• Voltaje de la batería: 3.7V
• Capacidad de la batería: 1.37Wh, 370mAh
• Entrada: 5V, 500mA
• Temperatura de trabajo: -20-40 ° C / -4 a 104 ° F
• Humedad de trabajo: 30-95% RH
!
Avoid looking directly into the light source
Évitez de regarder directement vers la source de lumière
Evite mirar directamente a la fuente de luz