Pull Out The Crown To Position Ii; Pull Out The Crown To Position - SHINOLA 5020.B Manual Del Usuario

SETTING THE TIME
Unscrew the crown to release it into first position.

Pull out the crown to position

III (the watch stopped).
Turn the crown counterclockwise until the current time
is shown (remember the 24-hour cycle).
Push the crown back into position I.
Remember to reseal the crown.
To do so, press it against the case until the threads
engage. Then turn it clockwise until tight.
BASIC FUNCTION ( START / STOP / RESET )
Example
Start: Press push-button A.
Stop: To stop the timing, press push-button
more and read the two chronograph counters:
e.g. 4 min. / 38 sec.
Zero positioning: Press push-button B.
(The two chronograph hands will be
reset to their zero positions.)
I
A once
A
B
38
ACCUMULATED TIMING
Example
Start: Press push-button A.
1 2
Stop: To stop the timing, press push-button
II III
counters, e.g. 15 min. 5 sec.
3
Restart: Press push-button
*Stop: Press push-button
The accumulated time = 20 min. 55 sec.
Reset: Press push-button
*Please Note: Following Step 4, the accumulation of timing can be continued by pressing
2
1
3
A once more and read the two chronograph
A to resume timing.
A to stop the timing and read the counters, e.g. 5 min. 50 sec.
B to return the two chronograph hands to their zero positions.
button A (Restart/Stop, Restart/Stop...)
39
3
2
1
A
B