Function Setting - LUCKY FL068 Manual De Operaciones

4.2 Function setting

Press and Hold the SETUP key for 3 seconds,the Save indicator{
the SETUP key again and again,the indicator will blink from thecurrent feature to be set.
SAVE { }---Alarm{
BAT.
Press the ENTER key to activate or deactivate a feature. The screen will automatically return
to normal operation after 5 seconds if no keys are pressed.
Press and hold the ENTER key for 3 seconds,the measure unit will blink, then press the ENTER
key again and again,the measure unit will blink from the current unit "M" or "FT" to be set.
}---Backlight{ }
battery
save
BAT.
mode
battery
normal
mode
Sensitivity
lowest
Sensitivity
highest
BAT.
BAT.
backlight
off
backlight
on
battery
low
alarm
off
battery
half
alarm
on
battery
full
} will blink; then pressing
5