ICY BOX IB-RD2121StS Serie Manual Del Usuario página 6

http://www.icybox.de
Dual 2.5" to 3.5" SATA HDD/SSD RAID Converter
1. Model – HDD – Interface – Colour
Model HDD
IB-RD2121StS 2x SATA I/II/III
2. Package contents
1x IB-RD2121StS, 1x accessories, 1x quick installation guide (multilanguage)
3. Key Features
• Enables the use of two 2.5" HDD's or high speed 2.5" SSD's in a 3.5" case
• Supports RAID 0/1/LARGE/NOR
• Hard disk capacity not limited
• Support HDD height up to 9.5 mm
• Supports SATA III up to 6.0 Gbit/s
• Easy Swap® - tool less HDD or SSD installation and exchange
• Supports Hot Swap
• Patented NSS connector supports 50,000 cycles hot-swap
• Low noise, fanless
4. Installation (Page 4-5)
1. Hold down the front button, then open the front door and put the 2.5" HDD/SSD into the IB-RD2121.
2. Put IB-RD2121 into 3.5" HDD slot position and fix with two screws on each side, four screws in total.
3. The IB-RD2121 could be applied to any other internal or external 3.5" HDD sized product also.
5. Changing the RAID mode:
RAID can be configured using hardware.
5.1 Hardware setting method:
1. Please power off the product.
2. Switching RAID mode to NOR mode.
3. Power on the product. After the LED indicator remains on, power off it again.
4. Switch to the RAID mode as you wish, power on the product and complete the setting
inside Disk management of your system.
Note: If you want to switch between different RAID mode, please switch back to NOR mode firstly and
follow the hardware setting step 2 to operate it.
IB-RD2121StS
Interface
SATA I/II/III
6 6
Colour
Black