Publicidad
STEP 12
12
(x58)
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn the cabinet over on it's front side.
Position upper back panel as shown. Align squarely with outer edges.
Flush bottom edge of upper back panel with bottom edge of middle fixed
shelf (E) and nail straight into back edges of left panel, right panel and
top. Position lower back panel ash shown. Align squarely with outer
edges. Flush bottom edge of lower back panel with bottom edge of
bottom (D) and nail straight into back edges of left panel, right panel,
bottom and middle fixed shelf.
raw
surface
N
B
raw
surface
O
Flush the bottom edge of the Lower Back Panel
with the bottom edge of Bottom (D).
20
12
D
Publicidad
