Before The First Use - Aigostar 8433325185879 Manual Del Usuario

– Farm houses;
– By clients in hotels, motels and other residential type
environments;
– Bed and breakfast type environments.
● Children should be supervised to ensure that they do not
play with the appliance.
● Do not use outdoors.
● Save these instructions.
KNOW YOUR MILK FROTHER
1. Lid
2. Jar
3. Switch button(with indicator)
4. Power base
5. Handle
6. Mixing paddle
7. Frothing paddle

BEFORE THE FIRST USE

The appliance can be used for finishing the following tasks separately:
I. frothing and heating milk;
II. only frothing separately, without heating;
III. only heating separately, without frothing.
1. Before using your milk frother, clean all the parts according o the section
"CLEANING AND MAINTENANCE".
2. Important: do not wash any parts in the dishwasher, and do not immerse the
jar in water. This may permanently damage the product and void the warranty.
03
All manuals and user guides at all-guides.com
3. The appliance is equipped with two accessories of mixing paddle and frothing
paddle, the mixing paddle is used for mixing milk during heating to prevent
from sticking. The frothing paddle is used for frothing milk during heating or is
used for frothing separately, but no heating. Select desired accessory according
to your task.
NOTE: the max capacity of the jar is 450ml.
OPERATION OF YOUR MILK FROTHER
I. Frothing and heating
1. Place the appliance on a flat surface.
2. Select frothing paddle, then open the lid and insert the frothing paddle onto
the shaft on the bottom of jar.
3. Fill the jar with the desired amount of milk (the initial temperature of milk is
5-10°C), and replace the lid.
NOTE: the max milk quantity permitted to add is 100ml, to avoid milk
overflowing after frothing.
4. Place the jar on the power base and connect the plug into a power outlet,
the indicator will light red.
5. Press the switch button once, the indicator will light blue. Then the appliance
will start to work. Once the temperature of milk has achieved about 65±10℃,
the heating element will stop heating and the frothing paddle will stop rotating
automatically; the indicator will illuminate red again until unplugging the
power outlet.
Note: During operation, you can stop operating by pressing the switch
button once.
6. When the appliance has stopped operating, open the lid, pour out the
warmed and frothed milk to enjoy it.
Caution: Minimum 3 minutes rest time must be maintained between two
continuous cycles, otherwise, the appliance will enter self-protection state
t
automatically after working for 5 cycles continuously, the indicator will be
illuminated blue and flash, the switch button will not be activated, after about 5
minutes, the appliance will enter standby state and you can continue operating
the appliance.
04