Omega Pro 81100 Manual De Piezas E Instrucciones De Funcionamiento página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATIONAL GUIDANCE CONTINUED
OUTPUT: USB DC5V/2A
1. Use a USB connection cable to charge 5V mobile phones and other electronic products from
the USB 5V 2A output port of the host.
2. Connect the charged product to the host and then press the power switch. The power LEDs are
alight to mean the host is charging the charged product.
LED TORCH
Switch button operating cycle is as follows:
1. Press twice the power switch to start the LED torch.
2. Press once more to enter S.O.S. mode.
3. Press again to turn off the light.
Notes:
1. Before jumpstarting the engine of vehicles, make sure the blue plug of Smart Jump Start Cable
is inserted to the bottom of EC5. Otherwise maybe the poor contact fails to jumpstart vehicles
and even causes the blue plug burned.
2. If fail to jumpstart vehicles at first time, please check (1) whether the connection of the clamps
to the vehicle battery is good or not (2) whether the host power is enough or not (3) whether
the vehicle is out of order or not.
3. If the environment temperature is lower than 10°C, the vehicle engine could not start at first
time after the unit connected to the vehicle battery because this unit contains auto-reset func-
tion. Please turn the ignition switch many times to warm up the unit battery. The vehicle engine
can be started smoothly once the unit battery reaches its working temperature to output large
current. (If a vehicle needs large current, the unit has to be warned up to maximize the current
output to start the vehicle engine smoothly. This is a feature of this unit.)
SPECIFICATIONS
Specification
DC 5V / 2A for USB port
Output
DC 12V for jumpstart port (EC5)
DC 14V-15V / 1A
Input
4-5 hours on 15V/1A
Charge Time
11,000 mAh
Capacity
13.76 oz.
Weight
5.79 x 2.95 x 1.14 in
Dimensions
400A
Starting Current
800 A
Peak Current
12V / Gasoline Engine or Diesel car
Suitable Engine
-4° F ~ 140° F (-20° C ~ 60° C)
Operating Temp.
-4° F ~ 176° F (-20° C ~ 80° C)
Storage Temp.
All manuals and user guides at all-guides.com
4
81100

Publicidad

Tabla de contenido
loading

Tabla de contenido