Operating Instructions; Unpacking Your Ice Maker; Connecting Your Ice Maker - NewAir NIM044BS00 Manual Del Propietário

OPERATING INSTRUCTIONS

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging, and then check all the
accessories are included. If any parts are missing, please contact our
customer service.
2. Remove all the tapes on the unit; take out the accessory parts inside.
3. Clean the interior with lukewarm water and a soft cloth.
4. Place your ice maker on a level counter table far from direct sunlight and
other sources of heat (i.e.: stove, furnace, and radiator). Make sure that
there is at least 6 inches between the back and sides of your ice maker
with the wall.
5. Allow one hour for the refrigerant fluid to settle down before plugging
your ice maker in.
6. The power plug must be accessible directly.
WARNING: fill with potable water only. Only use drinking water.

CONNECTING YOUR ICE MAKER

DANGER: Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged, please call customer service.
1. This unit should be properly grounded for your safety. The power cord of
this appliance is equipped with a grounding plug which mates with
standard grounding wall outlets to minimize the possibility of electric
shock.
2. Plug your appliance into an exclusive, properly installed, grounding wall
outlet. Do not under any circumstances; damage the grounding means of
the plug. Any questions concerning power and/or grounding should be
directed toward a certified electrician.
3. This appliance requires a standard 110-120Volt, 60Hz electrical outlet.
www.newair.com
EN
11