ProMed UVL-54 All-In Manual Del Usuario página 127

This symbol indicates that disposal of this product in the domestic waste is not
permitted within the EU. Waste devices contain valuable recyclable material
that should be recycled. Recycling also prevents uncontrolled waste disposal
from damaging the environment and human health. Therefore, please dispose
of all waste devices in the appropriate collection systems or send the device to
the place where you bought the device for disposal. They will then recycle the
device.
Guarantee
This product was produced with the utmost care and was thoroughly tested before it left the
factory. Therefore, we provide a warranty period of 24 months from the date of purchase for this
product. Promed products conform to their description and the relevant specifications; it is your
responsibility to ensure that the product which you have purchased is designed for your intended
use.
In the event of material defects and/or manufacturing errors which appear during proper use
and are detected during the warranty period, we will replace all defective parts of the product
free of charge within the warranty period, including the labour costs for warranty repairs.
The warranty does not cover:
• Normal wear on the product
• Defects which were caused during transportation or storage of the product
• Defects or damage which were caused through improper use or inadequate maintenance
• Damage resulting from disregarding the notes in the operating manual
• Damage resulting from modifications to the product which were not carried out by
• Promed.
• Damage caused by sharp objects or as a result of torsion, compression, being dropped,
an abnormal impact or other actions which are beyond Promed's reasonable control.
• Parts which are subject to wear (e.g. moving parts such as ball bearings, etc., fasteners,
etc.) are generally excluded from the warranty.
A claim under the warranty is not enforceable if:
• the product is not sent back in its original packaging or in adequately sure packaging;
• it has been modified or repaired by a person or company other than Promed or one of
Promed's authorised dealers;
• the product has been repaired using parts which are not approved by Promed;
• the serial number / LOT number of the product has been removed, deleted, changed or
made illegible.
• For reasons of hygiene, any products which have been exposed to direct contact with a
body or with bodily fluids (e.g. blood) must be packaged in an additional plastic bag before
they are sent back. In this case, a specific note of this situation must be made in the
package or in the accompanying documents.