Beep Volume - LG TCD1870QGS Manual De Usuario

36
PROGRAMMING MODE

13. Beep volume

Entering set up
mode.
You will see lqC1
Press the High Temp. button.
Press the med Temp. or the low Temp. button until
appears in the display.
Press the Start button.
Press the med Temp. or the low Temp. button until
appears in the display.
Press the Start button.
Display previous value.
Press med Temp.(+) or low Temp.(-) button to select High or
Low or Off.
Press the Start button.
The machine sets up the beep volume, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Turn on/off toggle switch
• Card type - Pull the service card
• OPL/Coin type – Press "High Temp. " twice
All manuals and user guides at all-guides.com
Button Display