Elvox EAM4 Manual Del Usuario página 14

EKKO
(Declaration of incorporation of partly completed machinery annex IIB Directive 2006/42/EC)
The undersigned, representing the following manufacturer
herewith declares that the products
Articles
are in conformity with the provisions of the following EC directive(s) (including all applicable amendments) and that the
following standards and/or technical specifications have been applied:
LV Directive 2006/95/EC:
EMC Directive 2004/108/EC:
Machinery Directive 2006/42/EC
Further hereby declares that the product must not be put into service until the final machinery into which it is to be
incorporated has been declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.
Declares that the relevant technical documentation has been compiled by Elvox SpA in accordance with part B of Annex
VII of Directive 2006/42/EC and that the following essential requirements of this Directive have been applied and fulfilled:
1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1, 1.5.2,
1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.6.1., 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
I undertake to make available, in response to a reasoned request by the national authorities, any further supporting
product documents they require.
Campodarsego, 02/05/2013
Note: The contents of this declaration correspond to what declared in the last revision of the official declaration available before printing this manual.
The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested to Elvox SpA
12
EC DECLARATION OF CONFORMITY
No. : ZDT00440.00
Via Pontarola, 14/a
35011 Campodarsego (PD) Italy
ACTUATORS FOR GATES WITH SWING DOORS - SERIES EKKO
EN 60335-2-103 (2003) + A11 (2009)
EN 61000-6-1 (2007), EN 61000-6-3 (2007) + A1 (2011),
EN 61000-6-2 (2005), EN 61000-6-4 (2007) + A1 (2011)
EN 13241 (2003) + A1 (2011), EN 12453 (2000)
The Managing Director
Elvox SpA
EKKO 350A
EN