Tripp-Lite UPB-05K2-APL Manual Del Propietário página 5

Operation
USB Device Charging
Note:
• Before charging your devices for the first time, first fully
charge the power bank.
• Multiple products can be charged simultaneously. However,
the total output current cannot exceed 2.4A/5V; otherwise
the over-current protection will activate and charging will
be halted.
1. With a user-supplied USB cable, connect your mobile device
2. Connect your Apple device to the built-in Lightning cable on
3. Attach your Apple Watch to the built-in magnetic charging
4. After you have connected all devices you wish to charge,
5. The devices will begin to charge and the LEDs will illuminate
6. To turn your power bank off when you are done charging,
double click the power button.
21-04-118-933E19-Book.indb 5 21-04-118-933E19-Book.indb 5
to the USB-A port on the power bank.
the power bank.
module on the power bank.
press the power button on the side of the power bank.
to indicate the battery capacity level. The table below
depicts the LED functionality when discharging.
Charging USB Devices
LED Status Battery Capacity (%)
= Lit
= Flashing
= Unlit
5
7/27/2021 1:18:34 PM 7/27/2021 1:18:34 PM