TOPDON TORNADO 90000 Manual Del Usuario página 10

CHARGING YOUR VEHICLE BATTERY
IMPORTANT:
Please do not operate the charger until you confirm the appropriate
charging mode for your battery. You can verify the voltage and
chemistry of the battery by consulting the manufacturer's manual,
or by reading the label on the battery.
1. Fix one end of the battery clamps with eyelet terminals to the
charger through the Hex Wrench included. Connect the red
terminal to the positive polarity (+), and the black terminal to the
negative polarity (-).
Hex
Wrench
2. Connect the other end of the battery clamps to the vehicle
battery. Connect the red clamp to the positive polarity (+), and the
black clamp to the negative polarity (-).
3. Connect the Sensor Plug to the jack on the charger, then attach
the Temperature Sensor to the battery.
TIP:
When the temperature of the battery is over 65°C (149°F),the Temperature Indicator
light will turn red, and the charger will stop working. Disconnect the charger and wait until
the battery cools down, then recharge it.
Negative
Terminal
Positive
Terminal
Sensor
Jack
Sensor
Plug
Negative Eyelet
Terminal
Positive Eyelet
Terminal