Cleaning - Bartscher VP3000 Instrucciones De Uso

6. Cleaning

WARNING!
Disconnect the device from the power supply (unplug!)
before cleaning. Let the device cool down.
The device is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the device.
Cleaning of the device
o Clean the device and the end of each working day or if necessary also between the
grilling processes.
o Use soft cloth only and never use any kind of abrasive cleaning agents which may
scratch the surface of the device.
o Never use any aggressive agents or sprays.
o Open the device and remove the grilling remains from the upper and lower grill
plate using appropriate scrapper by depositing the remains to the fat drain spout
and further down to the fat collection pan.
o Clean the upper and lower grill plate with a soft cloth soaked in warm water.
Dry the grill plates and apply a small amount of vegetable oil on them.
o In case of the hardest dirt, lubricate the still warm grill plates with vegetable oil and
leave to soak for a few minutes and then clean off the dirt with a paper towel.
o Remove the fat collection pan, empty and clean it with a soft cloth or sponge with
a mild cleaning agent. Rinse with clean water and then dry it thoroughly before
reinstalling in the device.
o Clean the body and handle of the device regularly with a soft, moist cloth with a
mild cleaning agent. All the cleaned surfaces should be dried thoroughly.
Storage of the device
o If the device is not used for a long time, clean it thoroughly as described and store it
in a place which is clean, dry, frost-free, protected from the sun and inaccessible for
children. Do not place any heavy objects on the device.
- 31 -