Controls; Loading - GE GTW491 Manual Del Propietario E Instalación

Operating instructions.
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
WARNING
before operating this appliance.
Throughout this manual, features and appearance may vary from your model.
Step 1
• Add the manufacturer's
recommended amount of
detergent or detergent packet
to the bottom of the wash
basket before adding clothes.
GE Appliances recommends the
use of High Efficiency detergents
such as in your energy
efficient washer.

Controls

D
A Start/Pause
Press Start to begin the cycle. NOTE: The lid must be closed for the washer to start the cycle. If the lid is closed, the lid will lock and the Lid
Locked light will illuminate.
Pressing Pause will unlock the lid (if locked at that time), pause the cycle and the Pause indicator light will blink.
To continue the cycle, press Start again. If machine is paused more than 12 hours, the cycle will be cancelled. If water remains in the
machine, select the Drain & Spin cycle to drain basket and spin water out of the washer basket.
Cycle Status Lights
B
Shows whether the washer is in the Fill, Soak, Wash, Rinse or Spin portion of the cycle.
If an out-of-balance condition is detected by the washer, the Spin light will blink during the remaining portion of the cycle and will
stay illuminated for a short time after cycle completion. When this occurs, the washer is taking actions to correct the out-of-balance
condition and complete the cycle normally. In some cases, the washer may not be able to balance the load and spin up to full
speed. If you notice the load is more wet than normal at the end of the cycle, redistribute the load evenly in the wash basket and
run a Drain & Spin cycle.
4
Step 2
• Loosely add items around
Infusor. Overloading may
negatively impact wash
performance. See page 9
for suggested loading
examples.
• Close lid.
NOTE: Washer will not start
with lid open.
D E
Step 3
• Select wash cycle.
• Select wash options,
including Deep Rinse
option when using
fabric softener.
• Select options.
B A
C
Step 4
• Press Start.
E E