Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONTROLS AND ELEMENTS
1
2
1. Cover with hole for cold vapor outlet
2. On and off, control steam flow and operating mode indicator
3. Water tank
4. Power connector
5. Water tank cap with drip valve
6. Water filling hole
USE OF HUMIDIFIER
Advance preparation
1. Place the humidifier on a dry, stable and level surface.
2. Check that the adapter plug cord is not attached to the humidifier and that
the power adapter is unplugged from the mains.
3. Separate the water tank 3 of the base, pulling it up.
4. Turn the water tank so that the cap 5 is up.
5. Remove the tank cap 5 by turning it counterclockwise to clockwise.
6. Fill the reservoir 3 with clean water.
7. Replace the cap 5 in the fill hole 6 and turn it clockwise clockwise until the
tank is closed.
8. Invert the tank and place it back on the humidifier base. Use a dry cloth to
wipe the water droplets on the surface of the base and the tank.
3
4
5
5
6
Publicidad
Tabla de contenido
