Control Panel - Smarter tools GP Serie Manual De Instrucciones

Controles y características (continuación)
_________________________________________________________________________________________________

Control Panel

1. Engine Switch – Used to turn on and off the
engine. For electric models, it is also used to
start the engine.
2. Digital Running Hours/Voltage/Hertz Meter –
Displays the number of hours the engine has
run, voltage used, and hertz used.
3. Circuit Breakers – Protects the generator
against electrical overload.
4. 120V 20A Duplex – This duplex is protected
by a 20A circuit breaker. Use this duplex to
operate 120 volt AC, single phase, 60 Hz
loads requiring up to 20 A or 2400 Watts of
power.
©2013 Smarter Tools, Inc. All Rights Reserved
5. 120V 30A Twist-Lock – This receptacle
powers 120 Volt AC, 60 Hz, single phase
loads requiring up to 30A or 3600 Watts of
power.
.
6. 120V 30A RV Outlet– This receptacle powers
a RV with 120 Volt AC, 60 Hz, single phase
loads requiring up to 30A or 3600 Watts of
power.
7. 12V DC Connector – Used to charge 12V DC
batteries.
8. General Specifications
9. Ground Terminal – Consult an electrician for
local grounding regulations.
.
vi