LG WT19 SBP Serie Manual Del Propietário página 79

Ocultar thumbs Ver también para WT19 SBP Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Symptoms
UE rebalancing operation is
not successful.
The load is too small.
Heavy articles are mixed with
lighter items.
The load is out of balance.
Control error.
Water level is too high due to
a faulty water valve.
The water level sensor is not
working correctly.
A motor error has occurred.
Clutch error.
Limpieza de Tina (Tub Clean)
Alarm.
Sensor for cloth-sensing is
defective.
Motor's revolution is too low.
Contact-point of Connector is
defective.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
Reason
Solution
• The automatic attempt to rebalance the load
was not successful. The cycle has been paused
to allow the load to be manually adjusted.
• Add more items to allow the washing machine to
balance the loads.
• Wash articles of somewhat similar weight.
• Manually redistribute the load if articles have
become tangled.
• Unplug the washing machine and wait 60
seconds. Reconnect power and try again. If the
error code is not released, call for service.
• Close the water taps, unplug the washing
machine, and call for service.
• Close the water taps, unplug the washing
machine, and call for service.
• Allow the washing machine to stand for 30
minutes and then restart the cycle. If the error
code is not released, call for service.
• Unplug the washing machine and call for
service.
• Run the Limpieza de Tina (Tub Clean)
programme.
• Manually redistribute the load if articles have
become tangled.
• Unplug the washing machine and wait 60
seconds. Reconnect power and try again.
• Call for service.
• To deactivate, press the Temp. (Temp.) and
Enjuague (Rinse) buttons simultaneously for 3
seconds.
EN
39

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wt17 sbp serieWt19wsbpWt17wsbp

Tabla de contenido