Hardware Installation - IOGear GUC3020DW6 Manual Del Usuario

Hardware Installation

1. Connect the Micro-B end of the included
USB 3.0 cable to the Micro-B port on the
USB External DVI Video Adapter. Then
connect the USB Type-A end of the cable
to any available 3.0 USB port on the
computer. Once plugged in, the Installing
Device Driver Message will come out and
the Windows User Account Control window
opens.
2. The device will be installed automatically.
USB TO DVI installed
The software for this device has been successfully installed.
USB TO DVI
USB 3.0 Cable
1
(included)
Secondary
Primary
Monitor
Monitor
7
Ready to use
4
DVI Cable
(not included)