Part Names - Pioneer SX-N30AE Manual De Instrucciones

> Before Start > Part Names

Part Names

Par t Names

Front Panel
1. Í STANDBY/ON button
2. NETWORK STANDBY indicator: Lights if the unit enters standby mode when the features
such as NET Stby are enabled that continue to work when this unit is in standby.
3. INPUT SELECTOR dial: Switches the input to be played. Turn the control to switch the
source in the following order; BD/DVD#SAT/CBL#AUX#GAME#TV#SACD/
CD#PHONO#AM#FM#NET#BLUETOOTH
4. MEMORY button: Used to register AM/FM radio stations.
5. TUNING MODE button: Switches tuning to an AM/FM station between automatic tuning
and manual tuning.
6. DISPLAY button: Switches the information on the display.
7. Display (P5)
8. SLEEP button: Set the sleep timer. Press the button repeatedly to select the time. When
4
> Install
  
  
> Initial Setup > Playback
     
  
the time set (30, 60, or 90 minutes) has elapsed, the unit switches to standby. If SLEEP
button is pressed after setting, the time remaining until sleep is displayed.
9. SETUP button: You can show advanced setting items on the display to provide you with
an even better experience (P27).
10.ENTER button: Press this button to confirm the selection.
11. RETURN button: Returns the display to the previous state during setting.
12.Direction/ TUNING /
broadcasting, tune in to the station with
PRESET .
13.VOLUME
14.Remote control sensor: Receives signals from the remote controller.
The signal range of the remote controller is within about 16y/5 m, at an angle of 20° on the
perpendicular axis and 30° to either side.
15.PHONES jack: Connect stereo headphones with a standard plug (Ø1/4"/6.3 mm
Supplementary information | Advanced Setup | Others
 
  
PRESET buttons: Move the cursor. When listening to AM/FM
TUNING or select the registered station with
